6 Yard Mini
at this size the container is often narrow enough to sit beside a car in a two-car driveway, and many localities waive a street permit if it stays fully on private property.
Start here
Volume is quoted, weight is billed
Dumpster rental isn't one product — a 10-yard container, a 20-yard, and a 40-yard roll-off solve different jobs, and picking the wrong one either strands debris in the yard or leaves unused space that still got hauled. The sizes below break down what each one actually holds.
Compare
Every size side by side
| Size | Dimensions | Holds about | Best for |
|---|---|---|---|
| a 6-yard mini | about 12 feet long, 8 feet wide, and 3 feet of side height | single-room cleanouts and small yard debris piles | clearing one room, a garage corner, or a small yard debris pile without giving up half the driveway |
| a 10-yard container | about 12 feet long, 8 feet wide, and 3.5 feet of side height | small remodels and garage or basement cleanouts | a single-room remodel or a garage full of accumulated junk that would otherwise take four pickup truck loads to the transfer station |
| a 15-yard container | about 16 feet long, 8 feet wide, and 4 feet of side height | mid-size remodels and roof tear-offs on smaller homes | a roof tear-off on a small to mid-size house or a bathroom and kitchen remodel running at the same time |
| a 20-yard container | about 22 feet long, 8 feet wide, and 4.5 feet of side height | larger remodels, flooring tear-outs, and mixed construction debris | a full flooring and subfloor tear-out or a mid-size home addition generating mixed lumber and drywall waste |
| a 30-yard container | about 22 feet long, 8 feet wide, and 6 feet of side height | new construction, major additions, and whole-house decluttering | framing and siding waste from a new home build or an addition large enough to fill a 20-yard twice over |
| a 40-yard container | about 22 feet long, 8 feet wide, and 8 feet of side height | large-scale demolition and bulky, low-density waste | a full house demolition or a commercial strip-out generating high volumes of lightweight bulky material |
Detail
Read more on any size
10 Yard
holds roughly the equivalent of three to four full-size pickup truck loads, which is the usual yardstick contractors use when sizing this one against hauling debris themselves.
15 Yard
shingles are dense enough that weight limits, not the fill line, are usually what caps this size on a roofing job rather than volume.
20 Yard
the extra 6 feet of length over a 15-yard comes almost entirely from a longer footprint, not more height, so it still fits most standard driveways.
30 Yard
the 6-foot wall height puts the load line above most people's reach, so loading heavier items usually means a ramp, a lift, or help rather than throwing debris over the side.
40 Yard
this size is sized for volume, not weight, so it suits bulky low-density loads like insulation and drywall better than dense material such as concrete or dirt, which usually hits its weight cap long before the bin looks full.
Not sure which size?
Describe the job and we will tell you which size actually fits it.